Samfurin No.:
Saukewa: APSP-48V300A-400CE
Sunan samfur
CE Certified 48V300A Lithium Baturi Caja APSP-48V300A-400CE
VIDEO KYAUTA
AZAN UMURNI
HALAYE & FA'IDA
-
Saboda fasahar sauyawa mai laushi na PFC+LLC, caja yana da girma a cikin abubuwan shigar da wutar lantarki, ƙarancin jituwa a halin yanzu, ƙarami a cikin ƙarfin lantarki da ripple na yanzu, babban ƙarfin jujjuya har zuwa 94% kuma yana girma cikin ƙimar ƙarfin module.
01 -
Taimakawa kewayon ƙarfin shigarwa mai faɗi daga 320V zuwa 460V ta yadda za a iya ba da cajin baturi ko da wutar lantarki ba ta tsaya ba.Fitar wutar lantarki na iya canzawa bisa ga kaddarorin baturi.
02 -
Ta hanyar taimakon fasalin sadarwar CAN, caja na EV na iya sadarwa da wayo tare da baturin lithium BMS kafin yin caji ta yadda cajin ya kasance lafiya kuma daidai.
03 -
LCD nuni, tabawa panel, LED nuni haske, maɓalli don nuna cajin bayanai da matsayi, ba da damar daban-daban ayyuka da daban-daban saituna, wanda shi ne sosai mai amfani-friendly.
04 -
Kariyar yawan wutar lantarki, kan-a halin yanzu, zafi mai zafi, gajeriyar kewayawa, asarar lokaci na shigarwa, shigarwa fiye da ƙarfin lantarki, shigar da ƙarancin wutar lantarki, da dai sauransu. Iya tantancewa da nuna matsalolin caji.
05 -
Hot-pluggable da modularized, yin gyara sassa da sauyawa mai sauƙi, da rage MTTR (Ma'anar Lokaci don Gyara).
06 -
Takaddar CE ta shahararriyar Lab TUV ta duniya.
07
APPLICATION
Cajin sauri, amintacce kuma mai wayo don injin gini na lantarki ko motocin masana'antu, gami da forklift na lantarki, dandali na aikin iska na lantarki, jirgin ruwa na lantarki, mai tona lantarki, mai ɗaukar wutar lantarki, da sauransu.
BAYANI
| Samfura | Saukewa: APSP-48V300A-400CE |
| Fitar da DC | |
| Ƙarfin fitarwa mai ƙima | 14.4KW |
| Fitar da Fitowar Yanzu | 300A |
| Fitar da Wutar Lantarki | Saukewa: 30VDC-60 |
| Rage Daidaitacce na Yanzu | 5A-300A |
| Ripple Wave | ≤1% |
| Ƙarfafa Ƙarfafa Ƙarfafawa | ≤± 0.5% |
| inganci | ≥92% |
| Kariya | Short circuit, overcurrent, overvoltage, juyi haɗi da kuma zafin jiki |
| Shigar AC | |
| Ƙididdigar Digiri na Ƙarshen Input | Uku mataki hudu-waya 400VAC |
| Input Voltage Range | Saukewa: 320VAC-460 |
| Shigar da Range na Yanzu | ≤30A |
| Yawanci | 50 ~ 60 Hz |
| Factor Power | ≥0.99 |
| Karya ta yanzu | ≤5% |
| Kariyar shigarwa | Ƙarfin wutar lantarki, Ƙarƙashin wutar lantarki, Ƙarfafawa da Rasa lokaci |
| Muhallin Aiki | |
| Yanayin Yanayin Aiki | -20% ~ 45 ℃, aiki kullum; |
| Ajiya Zazzabi | -40 ℃ ~ 75 ℃ |
| Danshi na Dangi | 0 ~ 95% |
| Tsayi | ≤2000m cikakken kayan fitarwa; |
| Tsaron Samfur Da Amincewa | |
| Ƙarfin Insulation | IN-FITA: 2120VDC; IN-SHELL:2120VDC; Saukewa: 2120VDC |
| Girma da Nauyi | |
| Girma | 600x560x430mm |
| Cikakken nauyi | 64.5kg |
| Class Kariya | IP20 |
| Wasu | |
| Mai Haɗin fitarwa | REMA |
| Rage zafi | Tilastawa Air sanyaya |
JAGORAN SHIGA
Yi amfani da kayan aikin ƙwararru don buɗe akwatin katako.
Yi amfani da screwdriver don kwakkwance sukurori a kasan akwatin katako.
Sanya cajar EV akan ƙasa kwance kuma canza tsayin ƙafar don tabbatar da cajar yana daidai.
Lokacin da cajar EV ke kashewa, haɗa filogin cajar tare da soket gwargwadon adadin lokaci.Lura: wannan tsari yana buƙatar ƙwararru don shiga.
Dos And Don'ts In Installation
- Saka caja akan abu mai jurewa zafi.KADA KA sanya shi juye.KADA KA sanya shi gangara.
- Da fatan za a bar isasshen ɗaki don caja ya huce.Tabbatar cewa nisa tsakanin iska da bango bai wuce 300mm ba, kuma tsakanin bango da tashar iska ya wuce 1000mm.
- Caja yana haifar da zafi a cikin aiki.Don haka da fatan za a sa caja ta yi aiki a cikin yanayin -20% ~ 45 ℃.
- Abubuwan waje kamar guntun takarda, guntun itace ko guntun ƙarfe dole ne su shiga cikin caja, ko kuma a iya haifar da wuta.
- Ya kamata a rufe filogin REMA da hular filastik lokacin da ba a amfani da caja.
- Dole ne tashar ƙasa ta kasance ƙasa sosai don hana girgiza wutar lantarki ko gobara daga faruwa.
JAGORANCIN AIKI
-
01
Tabbatar cewa an haɗa igiyoyin wutar lantarki ta hanyar da ta dace.
-
02
Da fatan za a haɗa filogin REMA da kyau tare da tashar cajin baturi na Lithium.
-
03
Matsa maɓallin kunnawa/kashe don kunna caja.
-
04
Danna maɓallin Fara don fara caji.
-
05
Da zarar abin hawa ya cika da kyau, zaku iya tura Maɓallin Tsaida don dakatar da caji.
-
06
Cire haɗin filogin REMA, kuma sanya filogin REMA da kebul ɗin baya akan ƙugiya.
-
07
Matsa maɓallin kunnawa/kashe don kashe cajar.
Aiki da Karya A Cikin Aiki
- Tsuntsayen REMA dole ne kada ya jike kuma kada wani abu na waje ya shiga cikin caja.
- Matsalolin dole ne su kasance ba ƙasa da 0.5M nesa da cajar EV, barin isasshen ɗaki don sanyaya.
- Kowace ranakun kalanda 30, tsaftace mashigar iska da mashigar don ingantacciyar aikin sanyaya.
- KAR KU KWANTA CHARJAR EV DA KANKU, KO KANA FARUWA DA GIDAN LANTARKI.ANA YIWA CHARJAR LALACEWA SABODA WARWARE KA KUMA KALA KADA KA JIN DADIN HIDIMAR BAYAN SALLA.
Dos da Kada a Amfani da Plug REMA
- Da fatan za a haɗa filogin REMA tare da tashar cajin baturi ta hanyar da ta dace.Tabbatar cewa ƙwanƙolin yana ɗaure da kyau a cikin tashar caji.
- Yi amfani da filogin REMA a hankali kuma a hankali.
- Lokacin da ba a amfani da caja, kare filogin REMA tare da hular filastik.
- KAR KA sanya filogin REMA a ƙasa a hankali.Saka shi a kan ƙugiya.