Model No.:
EVSE838-EU
Product Name:
22KW AC Charging Station EVSE838-EU with CE Certificate
PRODUCT VIDEO
INSTRUCTION DRAWING
CHARACTERISTICS & ADVANTAGES
-
With dynamic human-computer interaction, equipped with LED status indicators, the charging process is at a glance.
The embedded emergency stop mechanical switch increases the safety of equipment control.01 -
With RS485/RS232 communication monitoring mode, it is convenient to obtain the current charging pile Row data.
02 -
Perfect system protection functions: over-voltage, under-voltage protection, over-current protection, short-circuit protection, leakage protection, over-temperature protection, lightning protection, and safe and reliable product operation.
03 -
Convenient and intelligent appointment charging (optional)
04 -
Data storage and fault identification
05 -
Accurate power measurement and identification functions (optional) increase confidence for users
06 -
The whole structure adopts rain resistance and dust resistance design, and it has IP55 protection class. It is suitable for indoor and outdoor use and the operating environment is extensive and flexible
07 -
It is easy to install, operate and maintain
08 -
Supporting OCPP 1.6J
09 -
With ready CE certificate
010
APPLICATION
The company's AC charging pile is a charging device developed to meet the needs of charging new energy vehicles. It is used in conjunction with electric vehicle in-vehicle chargers to provide slow charging services for electric vehicles.This product is easy to install, small in floor space, easy to operate, and stylish. It is suitable for all kinds of open-air and indoor parking lots such as private parking garages, public parking lots, residential parking lots, and enterprise-only parking lots.Since this product is a high-voltage device, please do not disassemble the casing or modify the wiring of the device.
SPECIFICATIONS
|
Model number |
EVSE838-EU |
|
Maximum output power |
22KW |
|
Input voltage range |
AC 380V±15% Three Phase |
|
Input voltage frequency |
50Hz±1Hz |
|
Output voltage range |
AC 380V±15% Three Phase |
|
Output current range |
0～32A |
|
Effectiveness |
≥98% |
|
Insulation resistance |
≥10MΩ |
|
Control module power consumption |
≤7W |
|
Leakage current operating value |
30mA |
|
Working temperature |
-25℃～+50℃ |
|
Storage temperature |
-40℃～+70℃ |
|
Environment humidity |
5%～95% |
|
Altitude |
Not more than 2000 meters |
|
Security |
1. Emergency stop protection; 2. Over/under voltage protection; 3. Short circuit protection; 4. Over-current protection; 5. Leakage protection; 6. Lightning protection; 7. Electromagnetic protection |
|
Protection level |
IP55 |
|
Charging interface |
Type 2 |
|
Display screen |
4.3 inch LCD color screen (optional) |
|
Status indication |
LED indicator |
|
Weight |
≤6kg |
INSTALLATION GUIDE FOR UPRIGHT CHARGING STATION
Before unpacking, check whether the cardboard box is damaged
Unpack the cardboard box
Install the charging station on the horizontal
On the condition that the charging station is power off, connect the charging pile to the distribution switch by the number of phases using input cables, this operation requires professional personnel
INSTALLATION GUIDE FOR WALL MOUNTED CHARGING STATION
Drill six holes of 8mm diameter into the wall
Use M5*4 expansion screws to fix the backplane and M5*2 expansion screws to fix the hook
Check if the backplane and hooks are securely fixed
The charging pile is reliably fixed to the backplane
OPERATION GUIDE
-
01
After the charging pile is well connected to the grid, turn the distribution switch on to power on the charging pile.
-
02
Open the charging port in the electric vehicle and connect the charging plug with the charging port.
-
03
If the connection is OK, swipe M1 card at the card swiping area to start charging
-
04
After the charging is completed, swipe M1 card at the card swiping area again to stop charging.
Charging process
-
01
Plug-and-charge
-
02
Swipe card to start and stop
Dos and Don’ts In Operation
- The power supply used must be consistent with that required by the equipment. The three-core power cord must be reliably grounded.
- Please strictly follow the design parameters and conditions of use during use, and do not exceed the threshold in this user manual, otherwise it may damage the equipment.
- please do not change the specifications of electrical components, do not change the internal lines or graft other lines.
- After the charging pole is installed, if the charging pole cannot start normally after the equipment is powered on, please check whether the power wiring is correct.
- If the equipment has entered the water, it should immediately stop using electricity.
- The device has a limited anti-theft feature, please install in a safe and reliable environment.
- Please do not insert or remove the charging gun during the charging process to avoid irreversible damage to the charging pile and the car.
- If there is an abnormal situation during use, please refer to “Exclusion of General Faults” first. If you still cannot remove a fault, then please cut off the power of the charging pile and contact our customer service center.
- Do not attempt to remove, repair or modify charging station. Improper use may cause damage, power leakage, etc.
- The total input circuit breaker of the charging station has a certain mechanical service life. Please minimize the number of shutdowns.
- Do not hold dangerous goods such as flammable, explosive, or combustible materials, chemicals and combustible gases near the charging station.
- Keep the charging plug head clean and dry. If there is dirt, wipe it with a clean dry cloth. It is strictly forbidden to touch the charging plug head pin.
- Please turn off the hybrid tram before charging. During the charging process, the vehicle is prohibited from driving.
