Model No.:
APSP-24V80A-220CE
Product Name:
CE Certified 24V80A Lithium Battery Charger APSP-24V80A-220CE
PRODUCT VIDEO
INSTRUCTION DRAWING
CHARACTERISTICS & ADVANTAGES
-
Using PFC+LLC soft switching technology. High input power factor, low current harmonics, small voltage and current ripple, high conversion efficiency and high density of module power.
01 -
Supporting wide input voltage range to provide battery with stable and reliable charging under unstable power supply.
02 -
Wide output voltage range. For example, under emergency, 48V charger can charge for 24V lithium battery.
03 -
With the feature of CAN communication, it can communicate with lithium battery BMS to intelligently manage battery charging to ensure reliable, safe, fast charging and longer battery life.
04 -
Ergonomic appearance design and user-friendly UI including LCD display, LED indication light, buttons to show charging information and status, allow different operations, make different settings.
05 -
With protection of overcharge, over-voltage, over-current, over-temperature, short circuit, plug over-temperature, input phase loss, input over-voltage, input under-voltage, leakage protection, lithium battery abnormal charging, etc. Able to diagnose and display charging problems.
06 -
Hot-pluggable and modularized design, simplifying component maintenance and replacement and decreasing MTTR (Mean Time To Repair).
07 -
CE certified by TUV.
08
APPLICATION
To provide fast, safe and smart charging for industrial vehicles powered by lithium battery, including electric forklift, electric aerial work platform, electric stacker, electric watercraft, electric excavator, electric loader, etc.
SPECIFICATIONS
|
Model |
APSP-24V80A-220CE |
|
DC Output |
|
|
Rated Output Power |
1.92KW |
|
Rated Output Current |
80A |
|
Output Voltage Range |
16VDC~30VDC |
|
Current Adjustable Range |
5A~80A |
|
Ripple |
≤1% |
|
Stable Voltage Precision |
≤±0.5% |
|
Efficiency |
≥92% |
|
Protection |
Short circuit, over-current, over-voltage, reverse connection and over-temperature |
|
AC Input |
|
|
Rated Input Voltage |
Single phase 220VAC |
|
Input Voltage Range |
90VAC~265VAC |
|
Input Current Range |
≤12A |
|
Frequency |
50Hz~60Hz |
|
Power Factor |
≥0.99 |
|
Current distortion |
≤5% |
|
Input Protection |
Over-voltage, under-voltage, over-current and phase loss |
|
Working Environment |
|
|
Working Environment Temperature |
-20%~45℃, working normally; 45℃~65℃, reducing output; over 65℃, shutdown. |
|
Storage Temperature |
-40℃ ~75℃ |
|
Relative Humidity |
0~95% |
|
Altitude |
≤2000m full load output; >2000m use it in accordance with the provisions of 5.11.2 in GB/T389.2-1993. |
|
Product Safety And Reliability |
|
|
Insulation Strength |
IN-OUT:2120VDC IN-SHELL:2120VDC OUT-SHELL:2120VDC |
|
Dimensions And Weight |
|
|
Outline Dimensions |
400(H)×213(W)×278(D) |
|
Net Weight |
13.5KG |
|
Protection Class |
IP20 |
|
Others |
|
|
Output Connector |
REMA |
|
Cooling |
Forced air cooling |
INSTALLATION GUIDE
Cut the tape to open the carton. Remove the foam and take the electric forklift charger out of the carton.
Put the charger on the horizontal. Make sure obstacles are more than 0.5M away from the charger.
On the condition that the charger’s switch is off, well connect the charger’s plug with the socket.
Dos And Don’Ts In Installation
- Put the charger on the horizontal. Put the charger on something that is heat-resistant. Do NOT put it upside down. Do NOT make it slope.
- The charger need enough room for cooling. Make sure obstacles are more than 0.5M away from the charger.
- The charger will produce heat when working. To ensure good cooling, please make sure the charger works in an environment where temperature is -20%~45.
- Make sure that foreign objects such as fibers, paper pieces, wood chips, wood chips or metal fragments will NOT go inside the charger, or fire may be caused.
- The ground terminal MUST be well grounded, or electric shock or fire may be caused.
OPERATION GUIDE
-
01
Make sure the charger's plug well plugged into the socket.
-
02
Well connect the REMA connector with the lithium battery pack.
-
03
Push the switch to switch the charger on.
-
04
Press the Start Button to charge.
-
05
After the vehicle is fully charged, press the Stop Button to stop charging.
-
06
Disconnect the REMA connector with the electric vehicle.
-
07
Push the switch to switch off the charger and then unplug the charger's plug.
Dos and Don’ts In Operation
- Make sure the REMA connector and plug are NOT wet and foreign objects are NOT inside the charger before using.
- Make sure obstacles are more than 0.5M away from the charger.
- Clean the air inlet and outlet every 30 calendar days.
- Do not disassemble the charger by yourself, or electric shock will be caused. charger might be damaged during your disassembling and you may not enjoy after-sale service due to that.
