Nomoro ea Mohlala:
Setšoantšo sa AGVC-24V100A-YT
Lebitso la Sehlahisoa:
24V100A Lithium Battery Charger AGVC-24V100A-YT bakeng sa Likoloi tse Tataisoang
SEHLAHISO VIDEO
TAELO THAKO
LITŠOANTŠISO LE MELEMO
-
Theknoloji ea phetoho e bonolo ea PFC + LLC e sebelisetsoang ho netefatsa matla a phahameng a matla, li-harmonics tse tlaase tsa morao-rao, motlakase o monyenyane le ripple ea hona joale, katleho ea phetoho e ka holimo ho 94% le matla a phahameng a matla a module.
01 -
Ka tšobotsi ea puisano ea CAN, e ka buisana le lithium battery BMS ho laola tjhaja ea betri ka bohlale ho netefatsa ho tjhaja ka potlako le bophelo bo bolelele ba betri.
02 -
Moralo oa ergonomic ka sebopeho se bonolo le se bonolo sa mosebelisi ho UI, ho kenyeletsoa ponts'o ea LCD, phanele ea ho ama, leseli le bonts'ang la LED le likonopo.Basebelisi ba ho qetela ba ka bona tlhahisoleseling le boemo ba ho tjhaja, ba etsa ts'ebetso le litlhophiso tse fapaneng.
03 -
Ka tšireletso ea overcharge, over-voltage, over-current, over-themperature, short circuit, input phase loss, input over-voltage, input under-voltage, lithium battery tjhaja e sa tloaelehang, le ho hlahloba le ho bontša mathata a ho tjhaja.
04 -
Tlas'a mode othomathike, e ka tjhaja ka boyona ntle le ho laolwa ke motho.E boetse e na le mokhoa oa matsoho.
05 -
Ka tšobotsi ea telescoping;E ts'ehetsa phetisetso ea waelese, boemo ba infrared le CAN, WIFI kapa puisano ea mehala.
06 -
2.4G, 4G kapa 5.8G Wireless dispatching.Boemo ba infrared ka mokhoa oa ho amohela-ho amohela, ho bonahatsa kapa ho hasanya mokhoa oa ho bonahatsa.Customization e fumaneha bakeng sa borashe le bophahamo ba borashe.
07 -
Mefuta e mengata e fapaneng ea motlakase e ka fanang ka betri ka tjhaja e tsitsitseng le e tšepahalang tlas'a phepelo ea motlakase e sa tsitsang.
08 -
Theknoloji ea Smart telescoping ho khona ho lefisa AGV e nang le boema-kepe ba ho tjhaja ka thoko.
09 -
Sensor e nepahetseng ea infrared photoelectric ho netefatsa boemo bo nepahetseng haholoanyane.
010 -
E khona ho tjhaja AGV e nang le boema-kepe ba ho tjhaja ka thoko, ka pele kapa ka tlase.
011 -
Puisano e se nang mohala ho etsa ka bohlale litjhaja tsa AGV ho buisana le ho hokela AGV.( AGV e le 'ngoe ho tjhaja e le 'ngoe kapa tse fapaneng tsa AGV, tjhaja e le 'ngoe ea AGV ho AGV e le 'ngoe kapa tse fapaneng)
012 -
Borashe ba tšepe ea tšepe e nang le carbon e nang le conductivity e ntle ea motlakase.Matla a matla a mochine, ho kenya letsoho ka mokhoa o babatsehang, ho hanyetsa mocheso o moholo le ho hanyetsa ho hoholo ha kutu.
013
KOPO
Ho fana ka tjhajello e potlakileng, e bolokehileng, le KA HO SEBELISA AGV (Automated Guided Vehicle) ho kenyeletsoa AGV forklifts, logistics sorting jacking AGVs, latent traction AGVs, intelligent parking robots, heavy-duty traction AGVs boemafofaneng, boemakepe le merafong.
LIEKETSENG TS'OANELO
| ModelChe. | Setšoantšo sa AGVC-24V100A-YT |
| E lekantsoeInputVoltage | 220VAC±15% |
| KenyeletsoVoltageRbohale | Mohato o le mong oa terata e meraro |
| KenyeletsoCurentRbohale | <16A |
| E lekantsoeOthoholetsoPetsoe | 2.4KW |
| E lekantsoeOthoholetsoCurent | 100A |
| SephethoVoltageRbohale | 16VDC-32VDC |
| Hona joaleLetsisaAfetohangRbohale | 5A-100A |
| TlhōrōNoise | ≤1% |
| Palo ea li-voltsRegulationAnepahalo | ≤±0.5% |
| Hona joaleSharing | ≤±5% |
| Katleho | Palo ea lihlahisoa ≥ 50%, ha e lekantsoe, katleho ka kakaretso ≥ 92%; |
| Palo e hlahisoang <50%, ha e lekantsoe, katleho ea mochini kaofela ke ≥99% | |
| Tshireletso | Short-circuit, over-current, over-voltage, reverse connection, reverse current |
| Khafetsa | 50Hz-60Hz |
| Matla a Matla (PF) | ≥0.99 |
| Khopamiso ea Hona Joale (HD1) | ≤5% |
| KenyeletsoPtšitiso | Over-voltage, under-voltage, over-current |
| Ho sebetsaEtikolohoClintlafatso | Ka hare |
| Ho sebetsaTEmperature | -20% ~ 45 ℃, ho sebetsa ka mokhoa o tloaelehileng;45 ℃ ~ 65 ℃, ho fokotsa tlhahiso;ho feta 65 ℃, ho koala. |
| PolokeloTEmperature | -40 ℃-75 ℃ |
| LelokoHumidity | 0 - 95% |
| Bophahamo | ≤2000m tlhahiso e feletseng ea mojaro; > 2000m e sebelisa ho latela lipehelo tsa 5.11.2 ho GB/T389.2-1993. |
| DielectricSmatla
| IN-OUT: 2800VDC/10mA/1Min |
| IN-SHELL: 2800VDC/10mA/1Min | |
| OUT-SHELL: 2800VDC/10mA/1Min | |
| Litekanyo leWrobedi | |
| Litekanyo (kaofela-ka-e le 'ngoe)) | 530(H)×580(W)×390(D) |
| NeteWrobedi | 35Kg |
| Degree eaPtšitiso | IP20 |
| Tse dings | |
| BMSCtsietsiMethod | E KA KHOA ho buisana |
| BMSCkopaneloMethod | CAN-WIFI kapa ho kopana le 'mele oa li-module tsa CAN ho AGV le tjhaja |
| Ho romela CtsietsiMethod | Modbus TCP, Modbus AP |
| Ho romela CkopaneloMethod | Modbus-wifi kapa Ethernet |
| Lihlopha tsa WIFI | 2.4G, 4G kapa 5.8G |
| Mokhoa oa ho qala ho tjhaja | Infrared, Modbus, CAN-WIFI |
| AGVBrush Pli-arameter | Latela maemo a AiPower kapa litšoantšo tse fanoeng ke bareki |
| Sebopeho saCharger | Tsohle ka bonngwe |
| Ho tjhajaMethod | Brush Telescoping |
| Mokhoa oa ho pholisa | Pholiso ea moea e qobelloang |
| TelescopicStroke ea Brush | 200MM |
| Hantle Dboemobakeng sa Positioning | 185MM-325MM |
| Bophahamo ho tlohaAGVBrush Center ho ea Gchitja | 90MM-400MM;Customization e teng |
KEKELO MOTALI
Hlakola lebokose la lepolanka.Ka kopo sebelisa lisebelisoa tsa setsebi.
2.Sebelisa screwdriver ho qhaqha li-screw ka tlase ho lebokose la lepolanka le lokisang tjhaja ea EV.
Beha tjhaja moo ho tshekaletseng mme o lokise maoto ho netefatsa hore e tjhaja hantle.Etsa bonnete ba hore litšitiso li feta 0.5M hole le lehlakore le letšehali le le letona la tjhaja.
Boemong ba hore switch ea tjhaja e tingoe, hokela polaka ea tjhaja hantle le sokete ho latela palo ea mokhahlelo.Kopa litsebi ho etsa mosebetsi ona ka kopo.
Seo U se Etsang le Seo U se keng U se Etsa Ka ho Kenya
- Beha tjhaja sebakeng se tshekaletseng.Kenya tjhaja hodima ntho e sa kgoneng ho mamella mocheso.SE KE UA e beha fatše.SE KE UA etsa hore e be moepa.
- Chaja e hloka sebaka se lekaneng sa ho pholile.Etsa bonnete ba hore sebaka se pakeng tsa seketsoana sa moea le lebota se feta 300mm, 'me sebaka se pakeng tsa lebota le sebaka sa moea se feta 1000mm.
- Chaja e tla hlahisa mocheso ha e sebetsa.Ho etsa bonnete ba hore ho pholile hantle, ka kopo etsa bonnete ba hore tjhaja e sebetsa sebakeng seo mocheso o leng ho -20% ~ 45℃.
- Netefatsa hore lintho tse tsoang kantle ho naha joalo ka likhoele, likotoana tsa pampiri, lithapo tsa patsi kapa likotoana tsa tšepe HA LI TLA kena ka har'a tjhaja, kapa ho ka hlaha mollo.
- Kamora ho hokela phepelong ea motlakase, SE KE UA ama borashe kapa eleketrode ea borashe ho qoba kotsi ea ho tsukutloa ke motlakase.
- Seteishene sa fatše se TSHWANETSE ho ba le motheo o motle ho thibela ho tsukutloa ha motlakase kapa mollo.
TS'EBETSO TS'OANE
-
01
Bulela switch ho kenya mochini boemong ba standby.
-
02
2.AGV e tla romela letšoao ho kopa ho tjhaja ha AGV e se na matla a lekaneng.
-
03
AGV e tla itsamaela ho tjhaja ka boyona ebe e beha maemo le tjhaja.
-
04
Kamora hore boemo bo etsoe hantle, tjhaja e tla iketsetsa borashe boema-kepeng ba AGV ho tjhaja AGV.
-
05
Kamora ho tjhaja, borashe ba tjhaja e tla ikgula ka boyona mme tjhaja e tla ya boemong ba standby hape.
Lintho Tseo u lokelang ho li Etsa le Tseo u sa Tšoanelang ho li Etsa
- Etsa bonnete ba hore ke feela tlas'a tataiso ea litsebi moo tjhaja e tla hokela motlakase.
- Etsa bonnete ba hore tjhaja e omme mme ha e na dintho tsa kantle ho naha ha e sebediswa.
- Etsa bonnete ba hore litšitiso li feta 0.5M hole le lehlakore le letšehali le le letona la tjhaja.
- Hloekisa sekeno sa moea le ho tsoa ka matsatsi a mang le a mang a 30 a almanaka.
- Se ke oa arola tjhaja u le mong, ho seng joalo ho tla bakoa ke ho tsosoa ke motlakase.Charger e kanna ea senyeha nakong ea ha u harolla 'me u kanna oa se natefeloe ke ts'ebeletso ea kamora thekiso ka lebaka leo.